Type-1 Roller Blind Cutting Table
Small invididual roller shade/blind production can be met with the Type-1 roller fabric cutting machine. The Type-1 machine allows the user to complete a full production cycle of roller shades/roller blinds. Setting sizes, fabric cutting, attaching the upper tube, and mounting the lower bar can easily be completed. The Type-1 also has autocentering which sets the fabrics at the correct angle to the edge. This piece of window covering machinery is perfect for smaller operations.
The actual fabric cutting is perfromed manually. The clamp must be lowered and then the roller knife should be started and led through the fabric. When mounting the top tube to the fabric, adjusting the bumper in the corner to the needed system is easily done. To make this process quicker, a few items can be installed. A rolling machine, Clever Corner, or Tape Feeder will accelerate this step in production.
Finally, the Type-1 allows for complete quality control of the blind or shade. The blacklight is perfect to check the quality of the fabric while the control lift can test the whether the blind or shade is functioning properly.
The Type-1 roller fabric cutting machine is perfect for you for any startup blind and shade production. If you are looking to purchase the Type-1 roller fabric cutting machine please email info@wpmachines.com!
Want to see how this cutting table matches up with its variations? Read our article here.